Better Business Bureau
Serialcomm logo AUTHORIZED DEALER
Sima Enterprises Logo
1-800-267-9251

WELCOME TO OUR NEW LOOK!  OLD WEB REMNANTS MAY STILL BE IN YOUR CACHE (STORED LOCALLY).   [SHIFT] [F5] WILL FIX THIS.

Top Banner
HIGH SPEED INDUSTRIAL RS232 ISOLATOR 3-WIRE

DESCRIPTION

The SerialComm ISO-232-3P9 is a high quality industrial grade (wide temperature range) high speed bi-directional port powered 5000V (5000Vrms min AC) optically isolated RS232 port isolator in a 9 pin format. It can optically isolate any standard full duplex RS232 port up to almost 1 mbps.. The ISO-232-3P9 optically isolates the 3 lines: TX, RX, and GND which effectively protects your RS232 devices from transient voltage spikes, lightning strikes, ground loops, and noise problems. The unit is powered from the RS232 data lines. therefore, no external power. The isolator does not require any flow control or software drivers. The ISO-232-3P9 has a DB9 female connector on one RS232 side and a DB9 male connector on the other RS232 side.

RS232 ISOLATOR 3-WIRE

30-day Money Back Guarantee / 5-year Replacement Warranty
RS232 Isolator

SerialComm Model: ISO-232-3P9

Price: $26.95

FEATURES

  • No Device Drivers Needed
  • Industrial grade - High temperature range
  • High speed - operates from 300 to 912.6K baud
  • 5000V (5000Vrms min AC) optical isolation protects RS232 devices from electrical surges and lightning strikes
  • 5000V (5000Vrms min AC) optical isolation also eliminates ground loop and noise problems
  • Port Powered: no external power is necessary
  • Plug-and-Play (Device is hot-pluggable)
  • 5-year manufacturer's warranty
  • CE, FCC and RoHS Compliance Certified
  • Surface Mount Technology manufactured to ISO 9001 Standards

PRODUCT COMPLIANCES


ISO-9001:2015 QUALITY MANAGEMENT

ISO-9001:2015

Our internationally recognized ISO-9001:2015 Quality Management System (Cert. No. 743003912) with a scope of “Design, Sales and Distribution of Data Communication Products and IT Support Services” was recognized and certified by TÜV Rheinland of North America known for its very demanding and stringent requirements. For more details see our Quality Policy.

COMMUNICATION
STANDARDS: EIA/TIA RS232 Standard
BAUD RATES: From 300 Baud To 912,600 Baud
CONNECTOR TYPES: RS232 Side: DB9 Female and RS232 Side: DB9 Male
DISTANCE: Both RS232 Sides: 16 ft (5m)
ELECTRICAL
POWER SOURCE: Port Powered From RS232 Data Lines
OPTICAL ISOLATION: 5000V (5000Vrms 1min, AC)
CURRENT CONSUMPTION: Less Than 10 mA
STATIC PROTECTION: 15KV Electric Static Discharge (ESD) Protection
SURGE PROTECTION: 600W Surge Protection
MECHANICAL
HOUSING: Rugged ABS
WEIGHT: 0.8oz (24 grams)
DIMENSIONS: 2.47 X 1.33 X 0.70 in (62.8 X 33.8 X 17.8 mm)
ENVIRONMENTAL
OPERATING TEMP.: -40ºF to 185ºF (-40ºC to 85ºC)
STORAGE TEMP.: -40ºF to 185ºF (-40ºC to 85ºC)
OPERATING HUMIDITY: 5% To 95% - No Condensation
QUALITY
PRODUCT SAFETY: CE, FCC, RoHS 3, and REACH certified
RELIABILITY: Low Failure Rate - 99+% Reliability Since Inception
WARRANTY: 5-year Replacement Warranty

RS232 SIDE

SIGNAL TX RX GND
PIN # 2 3 5
FUNCTION TX RX GND

DB9 FEMALE

RS232 Isolator

RS232 SIDE

SIGNAL TX RX GND
PIN # 3 2 5
FUNCTION TX RX GND

DB9 MALE

RS232 Isolator

Using one ISO-232-3P9 unit:

Check that all connections comply with the connection diagrams. Perform continuity test on one unit: Connect the ISO-232-3P9 in between RS232 path. If there is continuity in the data stream then it is working. If the ISO-232-3P9 is not being powered properly it will not work at all.

Perform a voltage test:

Check that all connections comply with the connection diagrams. Perform a detailed voltage test: Connect the ISO-232-3P9 in between RS232 path. With a multi-meter perform the following test: Connect pin 1 to pin 5 and connect pin 2 to pin 3. When static pin 2 should be 0V and pin 3 should be 5.5V. When dynamic pin 2 should be 0V and pin 3 should be 3.7V.

Download FREE FULL VERSION AccessPort Advanced Serial Monitor, Simulation and Data Analysis Software Tool. This software tool is great for testing converters. Supports Windows 98/XP/VISTA/WIN 7/WIN 8/WIN 10. DOWNLOAD SOFTWARE AND USER MANUAL

FIGURE 1: 5000V ISOLATION BETWEEN A DTE AND A DCE

FIGURE 2: 5000V ISOLATION BETWEEN TWO DTES

2022 Copyright Protected - Sima S. Enterprises LLC - Terms & Conditions - Privacy Statement