BROWSE
BROWSE Product Category
RS232 TO RS485 CONVERTERS
RS232 TO RS422 CONVERTERS
RS485 TO RS422 CONVERTERS
SERIAL TO TTL CONVERTERS
USB to SERIAL ADAPTERS
ISOLATORS & SUPPRESSORS
SERIAL DATA REPEATERS
FIBER OPTIC CONVERTERS
ETHERNET TO SERIAL CONVERTERS
ACCESSORIES
- General Info
- Specifications
- Pinouts
- Images
- Troubleshooting
- Applications
DESCRIPTION
The SerialComm ETH-FIBER-SM-2 is a high quality bi-directional externally powered 1G Ethernet to single mode (SM) fiber optic converter (fiber optic modem) enclosed in a heavy-duty steel housing. The fiber optic converter converts a standard 10/100/1000BaseTX to 1000Base-SX/LX Single Mode SC or ST connector type fiber optic link. The ETH-FIBER-SM-2 supports straight-through (MDI) or crossover (MDX) cable configurations Besides the capability of long distance data transmission, fiber lines are inherently resistant to EMI/RFI and transient surges including lightning; therefore, they are ideal for data communications near heavy electrical equipment and other electrical or atmospheric interference conditions. The single mode fiber optic converter can extend the Ethernet signal distance to up to 12.4 miles (20 km) using SM fiber optic cable. The unit supports data rates up to 2000mbps and features auto-sensing data turnaround and therefore requires no flow control or any software drivers, The converter has no DIP switches or jumpers making it Plug-and-Play. The ETH-FIBER-SM-2 has a RJ45 connector for the 1G Ethernet port, and either an ST type or SC type connector for the fiber optic link. The media converter is wall, panel, or DIN rail mountable. Free optional DIN rail mounts are available at checkout for this converter. An external 5V / 110V-240V power adapter is included in package. This product is backed by our 30-day Money Back Guarantee and 5-year warranty.
10/100/1000M ETHERNET TO FIBER OPTIC CONVERTER SINGLE MODE (SM)
30 Day Money Back / 5 Year Replacement Guarantee
ST CONNECTOR TYPE
SC CONNECTOR TYPE ETH-FIBER-SM-2
FEATURES
- Plug-and-Play (hot-pluggable)
- Easily mounted on a DIN-rail, panel wall or piggyback
- Transmission speeds of up to 120kbps
- Fiber optic range of up to 12.4 miles (20 km)
- Available with ST or SC type connectors
- Full duplex bi-directional transmission
- Free optional DIN rail mounts
- Data direction auto-turnaround - no flow control is necessary
- Built-in surge, static and over-current protection
- LED indicators for power and data
- No software drivers are necessary
- Power required: 5VDC
- MTBF(Mean Time Before Failure): 353,102 Hours
- 5 year manufacturer's warranty
- CE, FCC, RoHS 3, and REACH certified
DATASHEETS
2D CAD DRAWINGS AND 3D MODELS
ST Type
SC Type
| COMMUNICATION | |
| STANDARDS: | IEEE 802.1 10Base-T, IEEE 802.3u 100Base-T, IEEE 802.3 100Base-FX, IEEE 802.3ab 1000Base-T, IEEE 802.3z 10000Base-SX/LX Standards |
| MODEL NUMBERS: | ETH-FIBER-SM-2-ST - ST Connector Version ETH-FIBER-SM-2-SC - SC Connector Version |
| BAUD RATES: | 10/100/1000 Mbps Half-duplex, 20/200/2000 Mbps Full-duplex |
| CONNECTOR TYPES: | DC Input: Male Jack, Ethernet Side: RJ45 Female and Fiber Side: either 2 X ST or 2 X SC Connectors Depending on Selected Model |
| DISTANCE: | 10BaseT, 100BaseT or 1000BaseT Side: 328 ft (100m) and Single Mode Side: 12.4 miles (20km) |
| CABLING: | CAT 3, 4, or 5, 5e, 6, 6e, 7, or 7e |
| ELECTRICAL | |
| POWER SOURCE: | 5VDC |
| DC/AC POWER ADAPTER: | Included 5VDC/(100-240VAC 50/60hz US Type A Plug) 500 mA |
| CURRENT CONSUMPTION: | 4 Watts |
| STATIC PROTECTION: | 15KV Electric Static Discharge (ESD) Protection |
| SURGE PROTECTION: | 600W Surge Protection |
| FIBER OPTIC | |
| FIBER OPTIC CABLING: | Compatible with Single Mode 8.3/125um, 8.7/125um, 9/125um or 10/125um Fiber Optic Cable |
| WAVELENGTH: | 1310nm |
| MECHANICAL | |
| HOUSING: | Heavy Duty Steel Housing |
| DIN RAIL: | Free Optional DIN Rail Mounts |
| WEIGHT: |
With ST
Connector: 8.11oz (230.0 grams) With SC Connector: 7.82oz (221.6 grams) |
| DIMENSIONS: |
With ST
Connector: 4.29 X 3.75 X
1.05
in (109.0 X 95.0 X 26.6 mm) With SC Connector: 3.87 X 3.75 X 1.05 in (98.2 X 95.0 X 26.6 mm) |
| ENVIRONMENTAL | |
| OPERATING TEMP.: | -4ºF to 167ºF (-20ºC to 75ºC) |
| STORAGE TEMP.: | -40ºF to 185ºF (-40ºC to 85ºC) |
| OPERATING HUMIDITY: | 5% To 95% - No Condensation |
| QUALITY | |
| PRODUCT SAFETY: | CE, FCC, RoHS 3, and REACH certified |
| QUALITY MANAGEMENT: | Manufactured and Distributed to ISO 9001:2015 QMS |
| MEAN TIME BEFORE FAILURE: | 353,102 Hours |
| RELIABILITY: | Low Failure Rate - 99+% Reliability Since Inception |
| WARRANTY: | 5-year Replacement Warranty |
ETHERNET RJ45 CONNECTOR
| PIN NUMBER | MDI SIGNAL | MDI-X SIGNAL |
| 1 | TX+ | RX+ |
| 2 | TX- | RX- |
| 3 | RX+ | TX+ |
| 4 | RX- | TX- |
| 5 | Not Connected | Not Connected |
| 6 | Not Connected | Not Connected |
| 7 | Not Connected | Not Connected |
| 8 | Not Connected | Not Connected |
LED INDICATIONS
| LED | STATE | INDICATION |
| PWR (Power) | OFF | Power Off |
| SOLID | Power On | |
|
100M (10/100M) |
OFF | 10M Ethernet |
| SOLID | 100M Ethernet | |
|
1000M |
OFF | Not 1000M Ethernet |
|
SOLID |
1000M Ethernet | |
|
DUP (Duplex Mode) |
OFF | Half Duplex |
|
FLASHING |
Full Duplex | |
|
TX (Ethernet Port) |
OFF | Ethernet Port is not Connected |
|
FLASHING |
Transmitting or Receiving Data | |
|
SOLID |
Ethernet is Connected | |
|
FX (Fiber Link Port) |
OFF | Ethernet is not Connected |
|
SOLID |
Ethernet is Connected |
Dimensions
Using one ETH-FIBER-SM-2 unit:
Perform a loop back test on one unit: Plug the power connector to the converter. Connect the Ethernet port to the PC. Connect the fiber optic in to fiber optic out. Running a Ethernet Analyzer program on the PC, send ASCII characters to the ETH-FIBER-SM-2 converter from one PC port, and check that the characters are received at the same PC port. This tests that the transmit and receive functions of the
Using two ETH-FIBER-SM-2 units:
Check that all connections comply with the connection diagrams. Perform a loop back test on two units: Plug the power connector to both converters. Connect the fiber optic in of one converter and fiber optic out to the other converter. Connect the fiber optic out of one converter and fiber optic in of the other converter. Connect the Ethernet connections to two Ethernet ports. Running the Ethernet Analyzer programs on both PCs, send ASCII characters to the ETH-FIBER-SM-2 converter from one PC port, and check that the characters are received at the 2nd PC port. Repeat the test in the opposite direction. This tests that the transmit and receive functions of both ETH-FIBER-SM-2 units are working properly.
Download FREE FULL VERSION AccessPort Advanced Serial Monitor, Simulation and Data Analysis Software Tool. This software tool is great for testing converters. Supports Windows 98/XP/VISTA/WIN 7/8/10/11. DOWNLOAD SOFTWARE AND USER MANUAL
