![]() |
|
|
||||||||
|
WORRY FREE GUARANTEE!
|
||||
|
With over 10,000 satisfied customers, Sima S. Enterprises offers the
finest quality industry proven USB, RS-232, RS-485, RS-422, TTL, Ethernet, and
Fiber Optic converters available. All of our products are
shipped the same day ordered and come with a 30 day satisfaction guarantee and a 5 year manufacturer's warranty.
|
||||
Frequently Asked Questions
Question 9: WHAT IS DTE / DCE? HOW DO I KNOW MY RS-232 DEVICE IS A DTE OR A DCE?
Answer: DTE stands for Data Terminal Equipment, a PC is a DTE. DCE stands for Data Communication Equipment, a Modem is a DCE. DTE normally comes with a Male Connector, while DCE comes with a Female Connector, but that is not always the case. Use the guide below as a simple way to confirm: Measure Pin 3 and Pin 5 (DB9 Connector) with a volt meter. If you get a voltage of -3V to -15V, it is a DTE device. If the voltage is on Pin 2, then it is a DCE device. Note: The result for the DB-25 Connector is reversed, and Ground for the DB-25 is on Pin 7.
| Previous Question | FAQ Page | Next Question |
|
|
|
|
|
|